Centre for Research and Innovation Programs
The Centre for Research and Innovation (CRI), located in Corner Brook, Newfoundland and Labrador, is a collaborative initiative founded by Grenfell Campus of Memorial University of Newfoundland, the College of the North Atlantic (CNA), and Corner Brook Pulp and Paper Limited (CBPPL). CRI serves as a hub for fostering research, creativity, and innovation, providing researchers, entrepreneurs, and professionals with the resources and support needed to explore new ideas, advance knowledge, and drive meaningful change.
About CRI
Supporting Research and Collaboration: CRI offers access to facilities, guidance, and networking opportunities to advance interdisciplinary research.
Encouraging Innovation: Through mentorship, commercialization support, and entrepreneurial development, CRI helps innovators and businesses thrive.
Fostering Community Engagement: CRI connects expertise with local needs to promote sustainable growth and innovation in the Corner Brook region and beyond.
For more information, visit the CRI webpage. To register for events and workshops, see below.
Upcoming Events & Workshops
With generous funding from project partners, CRI is proud to offer events and workshops that aim to enhance skills, foster innovation, and support professional development. These offerings are open to students, community members, and professionals eager to expand their knowledge and expertise.
Listed below are the upcoming events and workshops:
Details: Join our robotics club at the Makerspace every other Monday. Our next three meetings are on April 7, April 21, and April 28 from 4:30 pm to 6:00 pm. The club is open to anyone; however, underage participants need to be accompanied by a parent or guardian. For information, you may reach our Makerspace manager at jacobh@cricornerbrook.ca
Date & Time: April 7, April 21, and April 28 from 4:30 pm to 6:00 pm
Delivery Method: In person
Location: 3 Mill Road, Corner Brook, NL
Cost: No cost for the participants thanks to funding from the Government of Newfoundland's Labour Market Programs Support System (LaMPSS).
Registration: Not required.
Details: Join us every Tuesday from 7:30 to 9:30 for DIY Nights. Hosted by the DIY Society Western Newfoundland, these evenings offer a space for any makers from the community to start or continue a project. Some tools provided include electronics, sewing, 3D Printing, vinyl and laser cutting, wood working tools, etc. For information, you may reach our Makerspace manager at jacobh@cricornerbrook.ca
Date & Time: Tuesdays from 7:30 to 9:30 p.m.
Delivery Method: In person
Location: 3 Mill Road, Corner Brook, NL
Cost: No cost for the participants thanks to funding from the Government of Newfoundland's Labour Market Programs Support System (LaMPSS).
Registration: Not required.
Details: If you are working on a textiles project or you are just curious about starting a new one, come and join us every other Tuesday. Textile Tuesdays offer a relaxed atmosphere to work. Our next Textile nights are on Tuesday, April 8th and Tuesday, April 22 from 7:30 to 9:30 (first floor of CRI). For information, you may reach our Makerspace manager at jacobh@cricornerbrook.ca
Date & Time: Tuesday, April 8th and Tuesday, April 22 from 7:30 to 9:30
Delivery Method: In person
Location: 1st floor, 3 Mill Road, Corner Brook, NL
Cost: No cost for the participants thanks to funding from the Government of Newfoundland's Labour Market Programs Support System (LaMPSS).
Registration: Not required.
Details: In this hands-on woodworking workshop, participants will learn the fundamentals of hand tool woodworking by constructing a sturdy and functional three-legged stool. Through guided instruction, participants will gain skills and techniques needed to create a piece of furniture using traditional methods. All tools and materials are provided. For information you may reach us at: mery.perez@cricornerbrook.ca. This workshop is free of charge.
Date & Time: Saturday, April 26, 9:00 am to 1:00 pm
Delivery Method: In person
Location: 3 Mill Road, Corner Brook, NL
Workshop Cost: No cost for the participants thanks to funding from the Government of Newfoundland's Labour Market Programs Support System (LaMPSS).
Registration: Please register through this form.
Details: Guided by artist Melissa Tremblett, participants will create custom key chains, charms, jewelry, or stand-alone objects using the classic Shrinky Dinks technology. Original drawings which will be shrunk 3 times smaller than the original! If you can use a pencil, you can do this workshop! No experience necessary. Permanent markers, pencil crayons, etc, will be provided and you are welcome to bring your own markers or drawing supplies. For information, you can e-mail us at: mery.perez@cricornerbrook.ca. This workshop is free of charge.
Date & Time: Saturday, April 26, 1:00 pm to 3:00 pm
Delivery Method: In person
Location: 3 Mill Road, Corner Brook, NL
Workshop Cost: No cost for the participants thanks to funding from the Government of Newfoundland's Labour Market Programs Support System (LaMPSS).
Registration: Please register through this form.
Previous Events & Workshops
The following list of events and workshops were previously offered by CRI, and may be offered again in the future. If you are interested in any of these prior offerings, please email us to express your interest.
Details: Designed for an adult audience, this workshop is an introduction to Fusion 360 and 3D printing. If you are interested in learning the basics for 3D printing or want to learn more about creating your own designs, this workshop is for you. No prior experience necessary. Please note that you will need to bring your own laptop and download a free version of Fusion 360 before the session. More information will be provided upon registration.
Date & Time: Saturday, January 18, 8:30 am to 12:30 pm
Delivery Method: In person
Location: 3 Mill Road, Corner Brook, NL
Workshop Cost: No cost for the participants thanks to funding from the Government of Newfoundland's Labour Market Programs Support System (LaMPSS).
Registration: Please register through this form.
Details: Designed for teenagers ages 14 to 18, this workshop is an introduction to 3D printing. No prior experience necessary. Please note that you will need to bring your own device. More information will be provided upon registration.
Date & Time: Saturday, January 18, (1:30 – 4:30 pm)
Delivery Method: In person
Location: 3 Mill Road, Corner Brook, NL
Workshop Cost: No cost for the participants thanks to funding from the Government of Newfoundland's Labour Market Programs Support System (LaMPSS).
Registration: Please register through this form.
Details: Vector-based drawing programs allow users to manipulate each element of an image and are essential for many real-life graphical purposes, including the Laser Cutter/Etcher in the CRI’s Maker Space. In this workshop, participants will learn what vector images are and the basics of how to create and manipulate them. The workshop will also include a demo of how to use the CRI’s Laser Cutter. Participants will need bring their own computers with the free vector graphics program “Inkscape” already downloaded. More information will be provided upon registration.
Date & Time: Saturday, February 15 (8:30 am – 12:30 pm)
Delivery Method: In person
Location: 3 Mill Road, Corner Brook, NL
Workshop Cost: No cost for the participants thanks to funding from the Government of Newfoundland's Labour Market Programs Support System (LaMPSS).
Registration: Please register through this form.
Details: In this workshop, participants will learn what vector images are and the basics of how to create and manipulate them for appliqué-based work. A laser cutter allows you to cut intricate designs for appliqué that would be time consuming or simply not possible by hand. The designs need to be created as vector images, which give the laser cutter instructions on how to cut the fabric. The workshop is targeted at absolute beginners with vector-based graphics programs, but participants should be familiar with basic computer functions like using a mouse/trackpad, saving/opening files, etc. Participants will need to bring their own computers with the free vector graphics program “Inkscape” already downloaded (please reach out if this is an issue).
Date & Time: Saturday, February 15 (1:30 – 4:30 pm)
Delivery Method: In person
Location: 3 Mill Road, Corner Brook, NL
Workshop Cost: No cost for the participants thanks to funding from the Government of Newfoundland's Labour Market Programs Support System (LaMPSS).
Registration: Please register through this form.
Details: This workshop is designed to equip you with essential skills and insights. Participants will delve into the art of visual storytelling, exploring techniques that transform ordinary moments into compelling narratives. You'll gain hands-on experience in framing, lighting, and composition, learning how to use these elements to evoke emotion and convey powerful messages.
Date & Time: March 1 (9:00 am to 4:00 pm)
Delivery Method: In person
Location: 3 Mill Road, Corner Brook, NL
Workshop Cost: No cost for the participants thanks to funding from the Government of Newfoundland's Labour Market Programs Support System (LaMPSS).
Registration: Please register through this form.
Details: In this beginner level workshop, participants will prepare a simple file for TC2 (digital Jacquard Loom) weaving based on a digital photo. Participants will create one weavable file, and 1-3 sample files based on one photo that they have taken. No weaving or photoshop experience is required! We will also learn basic weaving terminology. Note: We will not be weaving in this workshop, but rather will be preparing files only. Please bring a photo file you would like to work on and your own laptop.
Date & Time: March 15 (9:00 am to 1:00 pm)
Delivery Method: In person
Location: 3 Mill Road, Corner Brook, NL
Workshop Cost: No cost for the participants thanks to funding from the Government of Newfoundland's Labour Market Programs Support System (LaMPSS).
Registration: Please register through this form.
Stay Connected
For the latest updates and events, follow CRI on Facebook or bookmark this page for more information. You can also reach out to CRI at maperez@mun.ca or reach out to CALL at call@mun.ca for support.